- Home
- Equipment
Refine by
Delta Controls Environmental Equipment & Supplies
10 equipment items found
Manufactured by:Delta Controls Corporation based inShreveport, LOUISIANA (USA)
Capacitance Level Switch, Optional Remote Mount, DPDT. The Delta Controls Model 105 Capacitance Level Switch uses RF Admittance technology to produce a switching action when a material level crosses the set point. The interface position of two liquids with different dielectric constants is accurately detected, including with cloudy interface conditions. One of the liquids should be nonconductive. ...
Manufactured by:Delta Controls Corporation based inShreveport, LOUISIANA (USA)
The Delta Controls Model 622 Flow Switch produces on/off switching action in response to liquid or gas flow through horizontal or vertical pipelines and ducts. The general purpose is to detect loss of adequate flow or to alarm of excessive flow thus protecting pumps, blowers, heat exchangers, etc. The paddle extends into the flowing stream and operates an output switch at the setpoint flow ...
Manufactured by:Delta Controls Corporation based inShreveport, LOUISIANA (USA)
The Delta Controls Model 626 Paddle Actuated Flow Switch is equipped with a body that becomes an unobstructed part of the pipeline. Model 626 is used to detect very low-flow rates in offshore deluge firewater piping systems. The Model 626 is equipped with a ‘fitted’ full swing-type paddle that fills the inside area of the in-line pipeline body under no flow conditions. It rotates 90 ...
Manufactured by:Delta Controls Corporation based inShreveport, LOUISIANA (USA)
The Delta Controls Series 60 Tilt Probes are designed for use with liquids, lump, granulated, or powdered solids. Slurries and liquids vary from extremely heavy and viscous to thin and watery. Stainless steel bail material is basic and suitable for most services. All-stainless probes are ideal when area is wet or corrosive while polished all-stainless probes are required for 3A sanitary ...
Manufactured by:Delta Controls Corporation based inShreveport, LOUISIANA (USA)
Float Switch, Top Inserted, Single Point. The Delta Controls Model 709 Float Switch is a simple mechanical device which is highly reliable over long periods of time. An alarm switch-type action is provided as the liquid level surface passes through the elevation where the sensing float has been positioned. The sensing float is attached to a vertical shaft, which can move up and down. Lifting the ...
Manufactured by:Delta Controls Corporation based inShreveport, LOUISIANA (USA)
The Delta Controls Model 621 Flow Switch is equipped with inside body dimensions and end connections that conform to the pipeline. The 621 is built to ANSI, ASME, and PED specifications. These switches protect pumps, blowers, heat exchangers, etc. The paddle magnetically connects to the output switch. A heavy-duty solid sealing tube separates the process fluid from the switch mechanism. Failures ...
Manufactured by:Delta Controls Corporation based inShreveport, LOUISIANA (USA)
Flow Switch, Low Flow, Safety Shower and Eye Wash Station Service. The Delta Controls Model 623 Dual Stage Flow Switch actuates at low-flow rates and prevents high pressure drops at 50 times the actuation rate. The switch output is used for alarm or control. The 623 consists of two sections: a flow sensing paddle and a pressure operated flow bypass valve. As the flow rate increases from zero, the ...
Manufactured by:Delta Controls Corporation based inShreveport, LOUISIANA (USA)
The Delta Controls Model 624 Flow Switch is highly reliable full swing, inline body switch. The paddle body fits into and becomes an unobstructed part of the pipeline. Model 624 is equipped with a full swing paddle and has an open bore matching the pipeline’s. The 624 has a flat blade-type paddle that rotates 90 degrees in response to increased flow rate. The switch actuates at a ...
Manufactured by:Delta Controls Corporation based inShreveport, LOUISIANA (USA)
The Delta Controls Model 551 Pressure Transmitter Sensor includes an oil-filled 316-L Stainless Steel or Hastelloy® C-276 diaphragm that isolates the strain gauge bridge from the process liquid or gas. The back of the sensor is usually vented to atmosphere to compensate for barometric pressure changes. The 551 has the entire electronics assembly epoxy sealed into the body. The advantage is ...
Manufactured by:Delta Controls Corporation based inShreveport, LOUISIANA (USA)
The Delta Controls Model 625 Flow Switch detects ultralow flows for 0.25 inch to 1.0 inch (6 mm to 25 mm) pipelines. Applications include flow protection, safety monitoring, purging for explosion proofing, as well as detection of additives, oiling, purging, etc with a low pressure drop at 35 times detected flow rate. It produces on/off switching actions at a preset rate of flow and is field ...